Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.
We have numerous articles on validation, but let's go back to the term itself. ASQA defines validation as a quality review of the assessment process.
In essence, validation confirms which parts of an RTO's assessment process are correct and pinpoints elements for improvement. With a solid grasp of its key components, validation becomes manageable.
Clause 1.8 of the SRTOs 2015 mandates that RTOs ensure their assessment systems, including RPL, are compliant with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
We are required by the standards to carry out two types of validation.
The first type of assessment validation checks that your RTO's assessment aligns with the training package requirements in your scope.
The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.
Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.
Defining the Two Types of Assessment Validation
An Introduction to Assessment Validation
As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
In contrast, post-assessment validation focuses on the implementation, requiring Registered Training Organisations to conduct assessments according to the Principles of Assessment and Rules of Evidence.
In this write-up, we will focus on assessment tool validation.
Guidelines for Conducting Assessment Tool Validation
Having reviewed the two types of validation, let’s dive into the specifics of assessment tool validation.
Timing for Conducting Assessment Tool Validation
The aim of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
Hence, whenever new learning resources are bought, assessment tool validation is necessary before student use.
You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.
Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:
- you update your resources
- add new training products on scope
- training product updates are reviewed against your course
- identifying your learning resources as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.
Identifying Training Products for Validation
It's important to remember this validation ensures that all learning resources are compliant before use. All RTOs need to validate resources for each unit.
What Do You Need for Assessment Tool Validation?
Academic Resources
Since you are conducting assessment tool validation, you will need the entire suite of your learning resources:
Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.
Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.
Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.
Other related resources – may include checklists, registers, and templates developed separately from the workbook and marking guide. Validate these to ensure they suit the assessment task and address unit requirements.
Validation Panel
Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.
As a whole, your validation panel must have:
Up-to-date vocational competencies and industry skills pertinent to the unit being validated
Current expertise and skills in vocational teaching and learning
Any of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its successor
Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It can also serve as proof that you have validated your resources before allowing students to use them.
While ASQA does not have a recommended or required template for assessment tool validation, many templates are available online. These tools generally require validators to review the tools as a whole to see if they meet the principles of assessment.
Assessment Principles Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.
A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?
As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?
Flexibility – Are various options provided in the assessment to demonstrate competence based on different needs and preferences?
Validity – Is the assessment assessing what it is intended to assess? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment produce consistent results every time, regardless of who conducts the training? Will different assessors make the same decision on skill competence?
Evidence Key Rules
Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure check here the learner has the required skills and knowledge?
Authenticity – Is the assessment tool confirming that the work is the candidate’s own?
Currency – Do the assessment tools mirror current units of competency and modern industry practices?
Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To avoid employing learning resources that leave unit requirements unmet, be sure to follow these guidelines:
Follow Through with Actions
Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
diaper changing
prepare bottles, feed babies from bottles, and clean equipment
solid foods preparation and feeding babies
appropriately respond to baby signs and cues
prepare and settle babies for sleep
monitor and promote physical exploration and gross motor skills suitable for the age
Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Look Out for Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.
Complete Compliance or Not Competent
Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?
Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What details can be included in a work package?
Answers may include:
Necessary resources
Pertinent costs
Time allocated for activities
Designated roles and responsibilities
When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
The same applies to assessment items with double-barrelled questions or those asking for multiple answers simultaneously. These can confuse both students and assessors, as shown in the sample question below:
Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.
Possible answers may include, but are not limited to:
Weather conditions – isolation of work area, engineering, PPE
Work area and ground conditions – eliminating hazards, isolating, engineering controls
People – isolation, engineering controls, administration
Structural hazards – substituting, isolation, engineering
Chemical hazards – isolating, use of engineering controls, administration
Equipment or machinery – isolation, use of engineering controls, administrative controls
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” But such guarantees mean you must wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s wiser to take the safe and compliant route.